In today’s restorative workflows, clinicians are often faced with an overwhelming number of primers, adhesives and resin cements — each with different protocols, indications and substrate requirements. The result? Unnecessary complexity, confusion and inconsistency.

But what if adhesive cementation could be simplified into one universal system for virtually any indication?

 That’s exactly the philosophy behind GC’s G-CEM LinkForce® system - One Universal Workflow. Three Simple Links. Predictable Results.

 
The Simplicity of Three Strong Links

 The G-CEM LinkForce® system is built around three key products that work seamlessly together to deliver strong, reliable and aesthetic outcomes across a wide range of restorative indications.

 Link One: G-Multi PRIMER — One Primer for Any Substrate

 The first link in the system removes one of the biggest challenges in adhesive dentistry: deciding which primer to use for which material.

 Whether bonding to zirconia, lithium disilicate, hybrid ceramics, composites or metals, G-Multi PRIMER is designed to do it all.

 Its universal capability comes from a powerful combination of chemical bonding agents:

• Silane for glass ceramics, hybrid ceramics and composites.
• MDP for zirconia, alumina and non-precious metals.
• MDTP for precious metals.

Instead of switching between multiple primers depending on the restorative material, clinicians can use a single bottle with a single protocol. Simply apply and air dry — no waiting, no complicated decision-making, no confusion.

 The result is a simplified workflow with dependable adhesion across virtually every substrate.

 
Why Simplicity Matters

 Modern restorative dentistry already demands precision, efficiency and consistency. Adding unnecessary bonding complexity increases the chance of: 

• Complex material selection.
• Technique sensitivity.
• Workflow interruptions.
• Inconsistent outcomes.

By consolidating multiple substrate protocols into one universal primer, the G-CEM LinkForce® system streamlines the cementation process while still delivering uncompromising bond strength¹.

 
Link Two: G-Premio BOND — Universal Bonding for the Tooth Surface

 The second link focuses on the prepared tooth surface.

 G-Premio BOND is a universal adhesive engineered to bond effectively to enamel, dentine, liners, composite cores and metal cores — again simplifying the workflow into one reliable solution.

Its advanced formulation combines: 

• 4-MET
• MDP
• MDTP

Clinicians also benefit from: 

• Compatibility with self-etch, total-etch and selective-etch techniques.
• Low film thickness of just 3µm.
• Excellent wetting characteristics.
• HEMA-free formulation to resist breakdown and discolouration^2.
• Optional dual-cure mode when required.

The beauty of G-Premio BOND lies in its versatility. Rather than adjusting protocols for different clinical situations, clinicians can confidently use one adhesive system across a wide variety of restorative procedures.

 
Link Three: G-CEM LinkForce®

 The final link brings the entire system together.

 G-CEM LinkForce® is a premium adhesive resin cement designed to provide:

• High bond strength^3.
• Excellent wear resistance^3.
• Reliable dual-cure polymerisation.
• Predictable aesthetics.
• Easy clean-up and handling.

Its ultra-low film thickness of just 4µm helps ensure excellent adaptation and seating of restorations, while its advanced filler technology contributes to durable margins and long-term performance.

 From cementation of veneers and onlays to zirconia crowns, lithium disilicate restorations, posts and bridges, G-CEM LinkForce® delivers consistent results across a broad range of indications.

 
The system is also available in multiple shades, including: 

• Translucent.
• A2.
• Opaque.
• Bleach.

This gives clinicians greater aesthetic control, particularly in highly demanding aesthetic restorative cases.

 
One Workflow for Any Indication

 The true strength of the system is not just in the chemistry — it’s in the simplicity.

Instead of juggling multiple products and protocols depending on: 

• Substrate type.
• Tooth preparation.
• Restoration material.
• Bonding indication.

Clinicians can rely on: 

1. G-Multi PRIMER for any substrate.
2. G-Premio BOND for the tooth surface.
3. G-CEM LinkForce® for definitive adhesive cementation.

 
Three Links. One Cohesive Workflow.

Strong. Dependable. Universal.

In adhesive dentistry, confidence comes from consistency. The G-CEM LinkForce® system was designed to reduce confusion, simplify decision-making and provide dependable bonding performance across virtually every restorative indication.

For clinicians seeking a streamlined adhesive workflow without compromising strength or aesthetics, this universal three-link system offers a smarter, simpler approach to modern cementation.

Shop Online today!

References:

 1. R&D Dept. GC Corporation. Data on file [ISO 11405: 2003 Bond strength

2. Takahashi M, Nakajima M, Hosaka K, Ikeda M, Foxton RM, Tagami J. Long-term evaluation of water sorption and ultimate tensile strength of HEMA-containing/-free one-step self-etch adhesives. J Dent. 2011 Jul;39(7):506-12. doi: 10.1016/j.jdent.2011.04.008. Epub 2011 May 6. PMID: 21575671. https://pubmed.ncbi.nlm.nih.gov/21575671/

3. N. Matsumoto, A. Arita, T. Kumagai. Wear resistance of a new resin-cement, G-CEM LinkForce. JDR, 2017; 95A, abstract 1958. https://iadr.abstractarchives.com/abstract/17iags-2621207/wear-resistance-of-a-new-resin-cement-g-cem-linkforce